Operating this unit
Insert a CD (CD-ROM) into the disc load-
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
# You can eject a CD (CD-ROM) by pressing
Close the front panel.
Push MULTI-CONTROL up or down to
select a folder when playing a compressed
# You cannot select a folder that does not have
a compressed audio file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
# If you select ROUGH, pushing and holding
MULTI-CONTROL left or right enables you to
search every 10 tracks in the current disc (folder).
(Refer to Searching every 10 tracks in the current
disc or folder on page 15.)
To skip back or forward to another
track, push MULTI-CONTROL left or right.
! There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read, FORMAT READ is dis-
! If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 54.
! When playing CD-EXTRA or MIXED-MODE
CDs, compressed audio and CD-DA can be
switched by pressing BAND.
! If you have switched between compressed
audio and CD-DA, playback starts at the first
track on the disc.
! When playing back VBR (variable bit rate) re-
corded files, elapsed play time may not be dis-
! When playing compressed audio, there is no
sound on fast forward or reverse.
! Playback is carried out in order of file number.
Folders are skipped if they contain no files. (If
folder 01 (ROOT) contains no files, playback
commences with folder 02.)
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
! When audio files are being played back,
you can select track in the current folder.
Track number input display appears.
Press 0 to 9 buttons to enter the desired
# You can cancel the input number by pressing
The track of entered number will play.
# After entering the number input mode, if you
do not perform an operation within about eight
seconds, the mode is automatically canceled.
Introduction of advanced
Press MULTI-CONTROL to display the
FUNCTION or AUDIO appears on the display.
Use MULTI-CONTROL to select
Turn to change the menu option; press to se-
The function name appears on the display.
Turn MULTI-CONTROL to select the
Turn MULTI-CONTROL to switch between the
functions in the following order: