Operating this unit
— A2DP (Advanced Audio Distribution Pro-
— AVRCP (Audio/Video Remote Control Pro-
! Battery strength indicator and signal level in-
dicator are shown in the display whenever
your cellular phone is connected to this unit
via Bluetooth wireless technology.
About the telephone source
Once connected via Bluetooth wireless tech-
nology, this unit will remain on telephone
source standby in the background all the
while the connection is sustained. This means
you can freely use the other sources and func-
tions of this unit, but still be ready to receive a
% Press SOURCE to select the telephone.
Press SOURCE until you see TELEPHONE dis-
# You can also select the TELEPHONE by press-
Setting up for hands-free phoning
Before you can use the hands-free phoning
function you will need to set up the unit for
use with your cellular phone. This entails es-
tablishing a Bluetooth wireless connection be-
tween this unit and your phone, registering
your phone with this unit, and adjusting the
For detailed instructions on connecting your
phone to this unit via Bluetooth wireless tech-
nology, refer to Connecting a cellular phone on
# Your phone should now be temporarily con-
nected; however, to make best use of the technol-
ogy, we recommend you register the phone to
To register your temporarily connected phone,
refer to Registering connected cellular phone
on page 25.
Adjust the earpiece volume on your cellular
phone for comfort. When adjusted, the volume
level is memorized in this unit as the default
# Caller's voice volume and ring volume may
vary depending on the type of cellular phones.
# If the difference between the ring volume and
caller's voice volume is big, overall volume level
may become unstable.
# Before disconnecting cellular phone from this
unit, make sure to adjust the volume to proper
level. If the volume has been muted (zero level)
on your cellular phone, the volume level of your
cellular phone remains muted even after the cel-
lular phone is disconnected from this unit.
Making a phone call
Dial a number
The most basic way to make a call is to simply
dial the number.
Press DIRECT on the remote control and
dial a phone number by pressing 0 to 9.
Press JOYSTICK on the remote control
to confirm the number.
Press OFF HOOK on the remote control
to call the number.
# You can also dial a phone number in the func-
Refer to Making a call by entering phone number
on page 31 for detailed instructions.
Calling a number in the Phone Book
or the Call History
Refer to Calling a number in the Phone Book
on page 27 and Calling a number from the Call
History on page 30 for detailed instructions.