Glacial 8LDIECHK-SC-WFC-VW-SSP User Manual page 15

5 Setting the Energy Saving Mode
(This controls when cold and hot water will be available)
1. Press the SET button until the Office, Home or
Always on icon flash.
2. Select the working time by pressing the up or
down arrows. Press SET to save.
Dispenser working time table
Monday to Friday
Office 7:00 am to 8:00 pm
6:00 am to 9:00 am
Home
4:00 pm to 12:00 pm
6 Shortcut for having cold and hot water during
non-working time
If cold and hot water is needed during non-working
time and reprogramming is not desirable then press
the left arrow for 3 seconds to activate the hot water
or right arrow for 3 seconds to activate the cold
water. The desired function will start and word for 8
hours, then revert back to the original Energy
Saving Mode.
Note: it may require 15 minutes to produce hot water
and up to 1 hour to produce cold water.
Note: If you do not exit your setting menu, It will save automatically and the display will return to normal
after 20 seconds without touching the buttons.
It will remember your settings if power failed.
7.Night Lights On/Off function
To turn On/Off LED Night Lights please hold SET button for 3 seconds when clock time is displayed.
8. Power management function
Hold VARIABLE HEAT button for 3 seconds, display will show current heating power. It can be
adjusted from 100 to 600 watts or turn off the heating system. Press SET button for saving
9. Heating system priority switch
It can work only when both heating and cooling system are turned on
H&C TOGETHER: Heating and cooling system do not have priority control, they can work together.
H&C CONSECUTIVE: Heating system has a top priority, it will work first, cooling system only works
when heating system stops.
HEAT
Saturday to Sunday
OFF
0:00 to 24:00
WATTS
LIGHTS
ON/OFF
ON/OFF
15
ALWAYS ON
HEAT
HEAT
HEAT
HEAT
LIGHTS
ON/OFF
ON/OFF
LIGHTS
ON/OFF
ON/OFF
LIGHTS
ON/OFF
ON/OFF
WATTS
LIGHTS
ON/OFF
ON/OFF