Toyota IHF1700 Owner's Manual page 25

1 Your handset device's Bluetooth
you must first turn on the Bluetooth
2 Activate the SETUP menu.
 When prompted, say "PAIR DEVICE".
The hands-free system responds: Set your device in scan mode and enter 0000 if prompted for
the passcode.
The blue LED will flash slowly during the pairing process.
4 Perform a device discovery from the handset device. For details on device discovery for your
handset device, refer to the handset device's user's guide.
Your handset device will search for any Bluetooth
complete, it will display a list of the devices it finds. Searching may take a minute or two to
complete.
5 Select Toyota from the list of devices.
6 If prompted by the handset device, enter the passkey 0000, and press the OK key.
7 The hands-free system responds: Pairing complete. Please say a friendly name for the device.
Say a friendly device name for your handset device. For example, you can say 'Jenny's Phone'
8 The hands-free system responds: <device name> added.
Some handset devices may ask you to accept the Bluetooth
9 After a few seconds the hands-free system responds: Connection complete.
Or use the UIM: A press and hold of the MULTI-FUNCTION button will activate the pairing
procedure.
Connect a paired handset device
1 Activate the SETUP menu.
2 When prompted, say "CONNECT <DEVICE NAME>", where <device name> is the friendly
name for the handset device you want to connect. For example 'Connect Jenny's Phone'.
The hands-free system responds: Connecting <device name>.
Upon successful completion, the hands-free system responds: Connection complete.
Note: You can quickly connect a paired handset device with a press and hold of the SEND
button when no devices are connected.
24 Bluetooth
®
feature is off by default. To use your car hands-free system,
®
feature in your device.
®
devices around it. When the search is
®
link. Enter YES.
®