Advertisement
Quick Links
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.
JUICE EXTRACTOR
Model: EJE-A2050(SS)
Owner's Manual
Please read this manual carefully
before operating your set.
Retain it for future reference.
Record model number and serial
number of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
Advertisement
Related Manuals for Elba EJE-A2050
Summary of Contents for Elba EJE-A2050
- Page 1 JUICE EXTRACTOR Model: EJE-A2050(SS) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using this appliance, basic precautions should always be followed, including the following: Read all instructions before use. Do not use the appliance if the stailess steel grater and filter assembly is damaged. Do not contact the plug or power cord with wet hands. Do not let the plug remains plugged when not in use. -
Page 3: Description Of Parts
DESCRIPTION OF PARTS 1. Motor base 2. Control switch 0 Stop / no power 1 Low speed 2 High speed 3. Safety locking arms 4. Pulp container 5. Pulp chute/ Juicer cover 6. Food pusher 7. Juicer collector assembly 8. Juice jug 9. - Page 4 • Place the pulp chute/ juicer cover on top of the juice collector assembly so that the facing of the pulp chute is on the opposite side of the spout. • Lock the pulp chute/juicer cover by raising the safety locking arms until it clicks into the grooves located on both side of the pulp chute / juicer cover.
-
Page 5: Operating The Appliance
OPERATING THE APPLIANCE 1. After assembling the appliance, connect the plug into the wall outlet. 2. Power on the appliance and the light indicator will be on (in red). WARNING: Before power on the appliance, make sure the control switch is turned to speed “0” (no power). -
Page 6: Cleaning And Maintenance
CLEANING AND MAINTENANCE Turn the control switch to the speed ‘0’ and wait for the motor to stop operating. Unplug the plug from the wall outlet. Disassemble the juicer( refer to disassemble the appliance). Clean the following parts with soapy water. A mild detergent is recommended to clean the parts. Rinse the parts well and dry thoroughly.