Huawei EchoLife HG510 Home Gateway User Manual page 58

User Manual
EchoLife HG510 Home Gateway
III.
RIP Setup
Figure 3-37 Advanced Setup – Routing – RIP
To activate RIP for the device, select the "Enabled" radio for
Global RIP Mode.
To configure an individual interface, select the desired RIP
version and operation, followed by placing a check in the "Enabled"
checkbox for the interface.
Click the <Save/Apply> to save the configuration, and to start or
stop RIP based on the Global RIP mode selected.
Huawei Technologies Proprietary
3-40
Chapter 3 Configuration Guide