Huawei EchoLife HG510 Home Gateway User Manual page 18

User Manual
EchoLife HG510 Home Gateway
III.
Attach the power adapter.
Connect the AC power adapter to the PWR connector on the
back of the device and plug in the adapter to a wall outlet or power
strip.
IV.
Turn on the HG510 and power up computers and LAN
devices.
Press the Power switch on the rear panel of the device down.
Turn on and boot up your computer(s) and any LAN devices such
as hubs or switches.
V.
Configure the HG510 through the Web interface
The detailed steps are described in "Chapter 3 Configuration
Guide".It will help you configure the HG510 to meet your need.
VI.
Save the configurations and Reboot.
To make the settings you made on the HG510 take effect, save
the configurations and reboot.
Huawei Technologies Proprietary
2-6
Chapter 2 Hardware Description