Huawei EchoLife HG510 Home Gateway User Manual page 45

User Manual
EchoLife HG510 Home Gateway
II.
Select Connection Type
Select "PPP over ATM (PPPoA)".
Refer to "3.3.1 II. Select Connection Type and Encapsulation
Mode".
III.
Configure PPP Username and Password
Enter PPP Username, PPP Password, and select "Authentication
Method" (AUTO/PAP/CHAP/MSCHAP). The actual parameter is
provided by your ISPs,you can contact them to get the detailed
information.
Refer to "3.3.1 III. Configure PPP Username and Password".
IV.
Enable IGMP Multicast and WAN service configuration
Refer to "3.3.1 IV. Enable IGMP Multicast and WAN service".
V.
Configure LAN Service
Set device IP (LAN IP) and Subnet Mask, and DHCP related
items.
Refer to "3.3.1 V. Configure LAN Service".
VI.
WAN Setup – Summery
The last page gives a summary of previous steps. Make sure that
the settings match the settings provided by ISPS, and then
Click<Save/Reboot> to complete the configuration procedure. Refer
to "3.3.1 VI. WAN Setup – Summery".
Huawei Technologies Proprietary
3-27
Chapter 3 Configuration Guide