Connecting The Hg510 - Huawei EchoLife HG510 Home Gateway User Manual

User Manual
EchoLife HG510 Home Gateway
Label
RST
PWR
LAN1-4

2.3 Connecting the HG510

You need to connect the HG510 to the phone jack, the power
outlet, and your computer or network.
Caution:
Before cable connection, turn off power of your computer(s), LAN
hub/switch (if applicable), and the HG510.
Figure 2-1illustrates the cable connections. Refer to the steps
that follow for specific instructions.
To reset to default settings, Hold the Reset
button for more than 5 seconds and then
release the button.
Connects to the supplied power cable
RJ-45 connector: connects the device to your
computer's Ethernet port, or to the uplink port
on your LAN's hub, using the cable provided.
Huawei Technologies Proprietary
2-3
Chapter 2 Hardware Description
Function