Before You Begin - Cisco DPR2320 Installation And Operation Manual

Chapter 2 Installing the Cable Modem Gateway for Internet Service

Before You Begin

This section provides the minimum requirements for installing the cable modem
gateways on your system and at user sites.
Cable System Requirements
To allow successful installation and operation, verify that your system meets the
following minimum requirements:
For the DPR2320 and DPR2325: DOCSIS 2.0, 1.1, or 1.0

For the EPR2320 and EPR2325: EuroDOCSIS 2.0, 1.1, or 1.0

Important: This guide does not cover installing cable modem gateway network and
headend equipment on your system. For information on installing network and
headend equipment, refer to the documentation provided with your network and
headend equipment.
Equipment Checklist
Before you install the cable modem gateway, check the items in the carton. The
carton contains the following items, except as noted:
One DPR2320, DPR2325, EPR2320, or EPR2325 cable modem gateway

One Ethernet cable (CAT5/RJ-45)

One USB cable

One AC power adapter

One CD-ROM containing the user's guide and the USB drivers

Notes:
An additional cable signal splitter and coaxial cable are needed to connect to a

VCR, a digital set-top converter, or a TV to the same cable connection as your
cable modem gateway.
Cables and other equipment needed for telephony service must be purchased

separately.
14 68-4004214-01 Rev D