Before You Begin - Cisco ASR 5000 Administration Manual

▀ Before You Begin

Before You Begin
Before you can configure the eWAG service:
1. Confirm that the chassis on which the eWAG software will be configured has been set up as described in the
System Administration Guide.
2. Confirm that the Enhanced Charging Service (ECS) in-line service is configured as described in the Enhanced
Charging Service Administration Guide. Also, confirm that the required license is installed.
3. Confirm that the Network Address Translation in-line service is configured as described in the Network Address
Translation Administration Guide. Also, confirm that the required license is installed.
4. Confirm that the eWAG license is installed.
The eWAG is a licensed Cisco product. Separate session and feature licenses may be required. Contact your
Cisco account representative for information on licensing requirements.
For information on installing and verifying licenses, refer to the Managing License Keys section of the
Software Management Operations chapter in the System Administration Guide.
▄ Cisco ASR 5000 Enhanced Wireless Access Gateway Administration Guide
40
Enhanced Wireless Access Gateway Configuration
OL-28188-02