Cisco DPR2320 Installation And Operation Manual page 112

Chapter 7 Wireless
Field Name
RADIUS Server
RADIUS Port
RADIUS Key
WPA Group Rekey
Interval
96
Description
Allows you to enter the IP address of the RADIUS
server used for authentication and encryption key
derivation
This field is used with 802.1x and WPA Network

Authentication
The factory default for this field is 0.0.0.0

Determines the port number of the RADIUS server.
The port number is usually 1812 (factory default) or
1645, depending on the server used
This field is used with 802.1x and WPA Network
Authentication
Allows you to set the Shared Secret key for your
RADIUS connection
The factory default for this field is empty

This field is used with 802.1x and WPA Network

Authentication
Allows you to set the WPA Group Rekey Interval in
seconds. This only applies when WPA and WPA-
PSK Network Authentication is enabled
Set this value to 0 (factory default) to disable
periodic rekeying. The valid range is 1 to
4,294,967,295 seconds
68-4004214-01 Rev D