Cisco DPR2320 Installation And Operation Manual page 84

Chapter 4 Advanced Features
Tunnel Section
Field Name
Tunnel
Name
Enable/Disable
Function Keys
The following table describes the function keys associated with the Tunnel section of
the VPN Setup page.
Key
Delete Tunnel
Add New Tunnel
Apply
Local endpoint settings Section
The following table describes the fields in the Local endpoint settings section of the
VPN Setup page.
Field Name
Address group type
Subnet
68
Description
Displays existing tunnels and allows each tunnel to be individually
configured
Displays the name of a group of settings for a single tunnel. If no name
is entered, the tunnels are named sequentially 1, 2, 3, and so on
Enables/disables a VPN tunnel after the tunnel is named and
configured. Click Apply to activate the selected setting (Enabled or
Disabled)
Description
Allows you to delete a tunnel
Allows you to create a heading for the tunnel settings that you can
select using the Tunnel drop-down menu
Activates the selected setting (Enabled or Disabled)
Description
Allows you to select the address group type for the local VPN access
group. The following types are available:
IP subnet

Single IP address

IP address range

Allows you to enter Subnet information based on the selected Address
group type:
For IP subnet, enter the subnet

For Single IP address, enter only the specific IP address

For IP address range, enter the starting and ending IP addresses

68-4004214-01 Rev D