Sony CDX-GT520 Operating Instructions Manual page 7

[ID
OPEN button page 5
[l]
AlBM +/- buttons (during MP3IWMA/
AAC playback)
To skip albums (press); skip albums
continuously (press and hold).
rnJ
Receptor for the card remote
commander
[ID
SEEK -/+ buttons
CD:
To skip tracks (press); skip tracks
continuously (press, then press again within
about I second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
[QJ
MODE button page 8
To select the radio band (FM/AM)*.
[J]
BTM/CAT button page 8
To start the BTM function (press and hold).
[jl]
Number buttons
CD:
(]): REP page 8
G):
SHUF page 8
@:PAUSE
To pause playback of a CD on this unit.
To cancel, press again.
Radio:
To receive stored stations (press); store
stations (press and hold).
~
DSPl (display)/SCRl (scroll) button
page 8
To change display items (press); scroll the
display item (press and hold).
IHl
RESET button page 4
[1§]
~
(eject) button page 5
To eject the disc.
~
Disc slot page 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
Ii .. (...... )/..
(~)
buttons
To control CD/radio, the same as (
SEEK)
-/+ on the unit.
Setup, sound setting, etc., can be operated by
.....
m
DSPl (display) button
To change display items.
m
VOL (volume) +/- button
To adjust volume.
PI!]
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
PJI
SEl (select) button
The same as the select button on the unit.
PE
t
(+)/.Jo (-) buttons
To control CD, the same as
(ALBM)
+/- on
the unit.
Setup, sound setting, etc., can be operated by
t
.Jo.
g]
SCRl (scroll) button
To scroll the display item.
PJJ
Number buttons
To receive stored stations (press); store
stations (press and hold).
*
In the case of
a
CD/MD changer or SAT tuner being
connected; when
(SOURCE)
is pressed, the
connected device ("MD," 'XM" or "SR'') will appear in
the display, depending on which device is
connected. Furthermore, if (
MODE)
is pressed, you
can switch the changer, or SAT tuner band.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (
SOURCE)
on the unit is pressed, or
a
disc is
inserted to activate the unit first.