Caution
When tuning in stations while driving, use Best
Tuning Memory (BTM) to prevent an accident.
Storing manually
1
While receiving the station that you
want to store, press and hold a
number button (CD to ®) until
"MEM" appears.
Note
If
you try to store another station on the same number
button, the previously stored station will be replaced.
Receiving the stored stations
1
Select the band, then press a number
button (CD to
®).
Storing automatically - BTM
1
Press
(SOURCE)
repeatedly until
"TUNER" appears.
To change the band, press
(MODE)
repeatedly. You can select from FM 1, FM2,
FM3, AM 1 or AM2.
2
Press and hold
(BTM)
until "BTM"
flashes.
The unit stores stations in order of frequency
on the number buttons.
A beep sounds when the setting is stored.
Tuning automatically
1
Select the band, then press
(SEEK)
-/+
to search for the station.
Scanning stops when the unit receives a
station. Repeat this procedure until the
desired station is received.
Tip
If
you know the frequency of the station you want to
listen to, press and hold (
SEEK)
-/+ to locate the
approximate frequency, then press (
SEEK)
-/+
repeatedly to fine adjust to the desired frequency
(manual tuning).
Page 8