Using Optional Equipment; Auxiliary Audio Equipment - Sony CDX-GT520 Operating Instructions Manual

•
10
ClOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON"
(e)
or "BEEP-OFF."
AUX-A*1 (AUX Audio)
To turn the AUX source display "AUX-A-ON"
(e)
or "AUX-A-OFF" (page 10).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off,
- "A.OFF-NO"
(e),
"A.OFF-30S (Seconds),"
"A.OFF-30M (Minutes)" or "A.OFF-60M
(Minutes)."
DEMO (Demonstration)
To set "DEMO-ON"
(e)
or "DEMO-OFF."
DIMMER
To change the brightness of the display.
- "DIMMER-ON": to dim the display.
- "DIMMER-OFF" (e): to deactivate the
dimmer.
CONTRAST
To adjust the contrast of the display.
The contrast level is adjustable in 7 steps.
M.DSPl (Motion Display)
To select the Motion Display mode.
- "M.DSPL-SA"
(e):
to show moving patterns
and spectrum analyzer.
- "M.DSPL-ON": to show moving patterns.
- "M.DSPL-OFF": to deactivate the Motion
Display.
A.SCRl (Auto Scroll)
To scroll long displayed item automatically
when the disc/album/track is changed.
- "A.SCRL-ON"
(e):
to scroll.
- "A.SCRL-OFF": to not scroll.
lOCAL (Local Seek Mode)
-
"LO~AL-ON"
: to only tune into stations with
stronger signals.
- "LOCAL-OFF"
(e):
to tune normal reception.
MONO*2 (Monaural Mode)
To improve poor FM reception, select monaural
reception mode.
- "MONO-ON" : to hear stereo broadcast in
monaural.
- "MONO-OFF"
(e):
to hear stereo broadcast in
stereo.
lPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "LPF
OFF"
(e),
"LPF 125Hz" or "LPF 78Hz."
lOUD (Loudness)
To allow you to listen clearly at low volume
levels.
- "LOUD-ON" : to reinforce bass and treble.
- "LOUD-OFF"
(e):
to not reinforce bass and
treble.
BTM (page 8)
*
1 When the unit is turned off.
*2 When FM is received.
Auxiliary audio equipment
By connecting an optional portable audio device
to the AUX input jack (stereo mini jack) on the
unit and then simply selecting the source, you
can listen on your car speakers. The volume level
is adjustable for any difference between the unit
and the portable audio device. Follow the
procedure below:
Connecting the portable audio
device
1 Turn off the portable audio device.
2 Turn down the volume on the unit.
3
Connect to the unit.
Connlecting cord*
(not
SU~)Dllea)
*
Be sure to use
a
straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1
Turn down the volume on the unit.
2 Press
(SOURCE)
repeatedly until "AUX"
appears.
"AUX FRONT IN" appears.
3
Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
S Adjust the input level (page 9).