Table of Contents
Advertisement
Use the Blue WAN Cable and connect one end to the To Router
port (located at the top of the base unit). Connect the other end of
the blue WAN cable to an unused LAN port on the back of your
existing router or modem/router.
3. Connect power to the Base Unit
Use the included power cord and plug one end into the red "Power
In" port on the back of the Base Unit and the other into the wall
outlet. To turn the Base Unit on, use the power switch at the bottom
and move it to the "On" position.
Connecting a Fax Machine to the Optional Base Unit
The DPS FLEX phone system allows you to plug in your fax
machine and receive and send faxes without having a separate fax
line. Plug the existing phone cord from your fax machine into the
yellow port on the back of the base unit marked "Fax".
NOTE- If you are having trouble sending or receiving faxes,
please refer to "Using A Fax Machine" on page 40
Connecting your Existing Phone Line(s)
Skip this section if you do not intend to use an existing phone line
You may connect one existing phone line (called CO line) into the
DPS FLEX phone system. This is generally done when you first
receive the system and are in the process of porting the phone
number on that line to AccessLine. This way, you can continue to
Advertisement
Table of Contents
