Extended Menu - Epson EH-TW6000W User Manual

Configuration Menu
Function
Projection Front, Front/Ceiling, Rear, Rear/Ceiling
User Button 3D Format, 3D Brightness, Inverse 3D Glasses
-
Split Screen
Reset Yes, No
*
Only EH-TW6000W is displayed.

Extended menu

Function
Operation Direct Power On
Sleep Mode
Illumination
High Altitude Mode On, Off
Menu/Settings
Menu/Settings
On, Off
Off, 5min., 10min.,
30min.
On, Off
63
Explanation
Change this setting depending on
how the projector is installed.
•
Front: Select if you are projecting
in front of the screen.
•
Front/Ceiling: Select if you are
projecting in front of the screen
suspended from the ceiling.
•
Rear: Select if you are projecting to
a rear screen from the back.
•
Rear/Ceiling: Select if you are pro-
jecting to a rear screen from the
back when the projector is suspen-
ded from the ceiling.
Select a configuration menu item to
assign to the
remote control. By pressing the
button, the assigned menu
item selection/adjustment screen is
displayed, allowing you to make
one-touch settings/adjustments.
Starts split screen display.
Resets all Settings to their default
settings.
Explanation
You can set up the projector so that projection
starts as soon as the power cable is plugged in
without any button operations.
Note that when this is set to On, projection starts
if power is restored after a blackout or other
power outage and the power cable is still plug-
ged into the projector.
If the set time is exceeded and no signal is input,
the projector is automatically turned off and en-
ters standby mode. When set to Off, the projec-
tor never enters sleep mode. When in standby
mode, press the button on the remote con-
trol or the button on the control panel to
start projection.
Set this to Off if the light from the indicators on
the control panel bother you when watching a
movie in a dark room.
Set this to On if you are using the projector above
an altitude of 1500 meters.
button on the
p.47
s