Problems With Usb Storage Devices - Epson EH-TW6000W User Manual

Troubleshooting
Check
Is WirelessHD set to Off?
Are signals being received within the Wire-
lessHD transmission range?
Is the supplied WirelessHD Transmitter
turned on?
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
Are the indicators of the supplied WirelessHD
Transmitter flashing alternately?
Interference or distortion appear in WirelessHD images
Check
Are signals being received within the Wire-
lessHD transmission range?
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Is the reception too low?

Problems with USB storage devices

Slideshow does not start
Check
Is the USB storage device using a security
function?
When WirelessHD is set to Off from the configuration menu,
projection is not possible for WirelessHD input signals. Set Wire-
lessHD to On, and then press the
WirelessHD p.61
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
Check the power lamp on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
No AV device is connected. Check that the HDMI cable is securely
connected.
A temperature warning has occurred. Operations are stopped if
there is not enough ventilation, such as when the device is placed
on an audio rack, or if it is being used in a room with a high
ambient temperature. Wait until it has cooled down, and then
try again.
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
If the transmissions are not strong enough, communication may
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
tings - WirelessHD - Reception
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady. Settings - WirelessHD - Reception
s
You may not be able to use USB storage devices that incorporate
security functions.
76
Remedy
button.
s
p.55
s
Remedy
p.55
s
p.55
s
p.61
Remedy
Settings -
Set-
s
p.61