Connecting With Wirelesshd (Eh-Tw6000W Only); Installing And Connecting The Wirelesshd Transmitter; Wirelesshd Settings; Changing The Source - Epson EH-TW6000W User Manual

Useful Functions
Connecting with WirelessHD (EH-TW6000W
Only)

Installing and Connecting the WirelessHD Transmitter

You can use the included WirelessHD Transmitter to wirelessly receive image and sound data as well as control
signals.
This eliminates the need to connect any cables to the projector, which is convenient when you are unable to
place the projector near your AV devices.
Connect the Transmitter to the HDMI output of any AV device or AV System capable of HDMI playback.
Projector
c
•
The receiver is located within the intake vent of the projector and therefore cannot receive any signals
directly from the rear. Set up the transmitter so that the front of the projector is facing the transmitter.
•
Place the WirelessHD Transmitter on a level surface.
•
You can view the signal strength from the WirelessHD settings menu.
Reception p.61

WirelessHD Settings

Changing the source

Press the button on the remote control to change the
source.
c
When receiving WirelessHD images, make sure Wire-
lessHD is set to On from the configuration menu.
Settings - WirelessHD
s
Transmitter
p.61
53
Player
Settings - WirelessHD -
s