Epson EH-TW6000W User Manual page 74

Troubleshooting
Image colors are not right
Check
Is the image signal format setting correct?
Are the cables connected correctly?
Is the contrast adjusted correctly?
Is the color adjusted correctly?
(Only when projecting images from a video
device)
Are the color saturation and tint adjusted cor-
rectly?
Images appear dark
Check
Is the image brightness set correctly?
Is the contrast adjusted correctly?
Is it time to replace the lamp?
Projection stops automatically
Check
Is Sleep Mode enabled?
When Video is input
If nothing is projected even when Video Signal is set to Auto
from the configuration menu, set the signal that matches the
connected device. Extended - Input Signal - Video Sig-
s
nal p.63
When Component is input
If nothing is projected even when Component is set to Auto
from the configuration menu, set the signal that matches the
connected device. Extended - Input Signal - Compo-
s
nent p.63
Check that all the cables required for projection are securely
connected. p.18
s
For the Video and Component ports, make sure the connector is
the same color as the cable port.
Adjust the Contrast setting from the configuration menu.
Image - Contrast p.57
s
Adjust the Advanced setting from the configuration menu.
Image - Advanced p.57
s
Adjust the Color Saturation and Tint settings from the config-
uration menu. p.57
s
Adjust the Brightness setting from the configuration menu.
Image - Brightness
s
Adjust the Contrast setting from the configuration menu.
Image - Contrast p.57
s
When the lamp is nearly ready for replacement, the images be-
come darker and the color quality becomes poorer. When this
happens, replace the lamp with a new lamp.
If no image signal is being input and no operations are made for
approximately 30 minutes, the lamp turns off automatically, and
the projector enters standby status. The projector returns from
standby status when you press the
control or the button on the control panel. If you do not want
to use Sleep Mode, change the setting to Off.
Operation - Sleep Mode
73
Remedy
p.18
s
Remedy
p.57
s
Remedy
button on the remote
s
p.63
p.81
Extended -