Reconnecting; Wirelesshd Settings Menu - Epson EH-TW6000W User Manual

Useful Functions

Reconnecting

If the projector cannot project images from the WirelessHD Transmitter, follow the steps below to reconnect.
a
Setup the WirelessHD Transmitter
close to the projector.
c
Check that there are no other
projectors operating in the area.
b
Start playback on the AV device, and
then turn on the projector and the
transmitter.

WirelessHD settings menu

a
Press the
The configuration menu is displayed.
b
Select Settings - WirelessHD.
The WirelessHD settings screen is
displayed.
Available functions on the WirelessHD settings menu
Function
Device Connections
WirelessHD
Reception
Rename Device Name
Erase Device Name
Reset
c
You can find the unique MAC address for the WirelessHD Transmitter on the sticker on the bottom
of the device.
p.55
s
button.
Displays a list of available Wireless HD devices that can be connected. The device names
and MAC addresses are displayed in the list.
Enables or disables the WirelessHD function.
When it is disabled, turn off the WirelessHD Transmitter.
Displays the reception.
Allows you to change the names of devices displayed in Device Connections.
Erases the changed device name, and returns the default name in its place.
You can reset all adjustment values for the WirelessHD settings menu to their default
settings.
c
Approximately 10 seconds after
turning on the projector, press the
[Setup] button on the transmitter.
c
Make settings for each of the
displayed functions.
Explanation
54