Table of Contents
Advertisement
Replacing the Inner Pane of Glass
1. Make sure the door is locked open (see fig. 24).
2. Replace the inner pane:
– Check that the four rubber pads are in place (D in Fig. 27).
– Check that you are holding the pane the correct way. You
should be able to read the wording on it as it faces you.
– Insert the pane in the left E and right F slide guides (fig. 28),
and gently slide it to the retainers H (fig. 29).
– Top oven door only: Reassemble the seal G in the correct
way (fig. 30) by hooking the no. 3 fixing hooks in the proper
holes (fig. 31).
– Unlock the oven door by opening it completely and closing
the lever A on the left and right hinges (Fig. 34).
Fig. 29
The top oven
door has a
sealed gasket in
the top part.
It is normal the opened gap between
the top edge of the inner glass and the
sealed gasket. This allows the cooling
air circulation.
The lower oven
door has not a
sealed gasket in
the top part.
Fig. 33
38
Fig. 27
E
E
Fig. 28
H
H
H
Fig. 31
Fig. 32
Fig. 34
Model:
DV 990..
D
F F
G
G
Fig. 30
A
A
Advertisement
Table of Contents
