CDA 9Q6 Series Manual For Installation, Use And Maintenance page 32

Assembling and Dismantling of the Side Runner Frames
– Assemble the wire racks to the oven walls using the 2 screws (Figs. 12-14).
– Slide into the guides, the shelf and the tray (Figs. 13-15). The rack must be fitted so that the safety notch, which
stops it sliding out, faces the inside of the oven; the guard rail shall be at the back.
– To dismantle, operate in reverse order.
32
Guard rail
Guard rail
Fig. 12
Guard rail Guard rail
Fig. 14
Stop notch Stop notch
Fig. 13
Stop notch Stop noch
Fig. 15