Ice Box Door Assembly - GE Adora DFE29JG Technical Service Manual

Ice Box Door Assembly

The ice box door assembly consists of the door,
latch, and gasket.
Door Panel
The ice box door assembly is attached to the left-
side refrigerator door with 2 hinges. To remove the
ice box door assembly, it is necessary to open the
door and remove the two T-15 Torx screws and the
top hinge. The door assembly can then be lifted off
the bottom hinge.
Top Hinge
Door Gasket
Door Latch
– 67 –
The door latch cover must be removed to access the
latch to the ice box door. The cover is attached to
the door with 2 rear tabs and 2 front tabs. A small
fl at blade screwdriver can be used to pry out the
front of the latch cover.
Door Latch Cover
The cover can then be pulled toward the latch
handle and removed.
(Continued next page)