Water Filter Manifold - GE Adora DFE29JG Technical Service Manual

Water Filter Manifold

The water fi lter manifold for model PFE29 is located
behind the water fi lter access door. It is attached to
the left refrigerator door with 2 upper and 2 lower
tabs and a Phillips-head screw.
To remove the water fi lter manifold on Model PFE29:
1. Remove the water fi lter. (See
2. Place the hinge cover in the service position.
(See .)
Hinge Cover
3. Remove the 1/4-in. hex-head screw and clamp
from the fi lter inlet tube.
Clamp
4. Remove the plastic lock clip off the coupling
and push the collar in while pulling the fi lter
inlet tube out from the connector located at the
rear of the cabinet. Remove the inlet tube from
retainer.
Connector
Note: See note on page 40 regarding lock clips.
5. Pull the fi lter inlet tube out of the tubing conduit
.)
Water Filter
6. Slide the spring off the fi lter inlet tube.
Note: In the following step, the fi lter door has 2 tabs
located inside, above the hinge, that attach it to the
refrigerator door. Either tab can be pressed inward
to release the fi lter door.
Retainer
Lock Clip
– 75 –
at the top of the cabinet.
Tab
Hinge
Spring
Tab
(Continued next page)