User Set Mode - Vertex Standard VX-451 Operating Manual

The VX-454/-459 includes a "User Set (Menu)"
Mode which allows the user to define or configure
various settings, such as Beep On/Off, Squelch, etc.
To activate the "User Set (Menu)" Mode:
r Press (or press and hold) the programmable key
assigned to the "SET" function.
r Select the User Set Mode Item you wish to
change using the [ A ] / [ B ] keys, then use the
[ SIDE-1 ] / [ SIDE-2 ] button to adjust the setting of
the selected item.
r Press the [ D ] key to store the new configuration.
The display indicates "- SET -" briefly, then exits
to normal operation.
You may cancel the selection by pressing the [ C ]
key. The display indicates "- CANCEL -" briefly,
then exits to normal operation.
Note: The menu "14: REC Mode" and "15: Play
Mode" will appear only when the Voice Re-
cording Unit is installed.
VX-450 S O
erieS perating
u s
ser et
M
anual
m
ode
d d
Isplay escrIptIon
Select the Squelch Threshold Level (–15 to +15)
1 SQL
2 BEEP Set the Beep ON / OFF
Set the Bell ON / OFF
3 BELL
(Bell engaged by sub-audible CTCSS/DCS)
4 LIGHT Set the BUSY/TX LED and Lamp ON / OFF
Set the Key Lock function ON (Lock) / OFF (Free)
5 KEY
Set the DIAL Lock function ON (Lock) / OFF (Free)
6 DIAL
Set the PTT Lock function ON (Lock) / OFF (Free)
7 PTT
8 SCAN Set the Scan status
OFF: Stop the Scan
ON: Start the Scan
GRP: Start the Group Scan
FM: Start the Follow-Me Scan
Set the Dual Watch ON / OFF
9 DW
(same function as DW key)
Set the Minimum Volume level (000 to 255)
10 AF
Set the VOX level (–2 to +2)
11 VOX
(This menu will appear only when the VOX setting
of the current channel is set to "Key ON" or "Power
ON")
12 TX SV Set the TX Saver ON / OFF
13 ENCR Set the Encryption ON / OFF
(This menu will appear only when the Encryption set-
ting of the current channel is set to "Key ON" or "Power
ON")
Select the recording mode.
14 REC
ONE: Enables recording one message (max. 120
seconds), and playback from the beginning of
the message.
ROL: Enables recording whenever squelch opens,
and playback of the last 120 seconds.
Set the priority audio on playback mode.
15 PLY
PLY: Playback audio is higher priority than received
signal.
SIG: Received signal is higher priority than play-
back audio.
37