Vertex Standard VX-451 Operating Manual page 33

c s
ode et ( Vx-454 & Vx-459 o
r Press (or press and hold) the assigned program-
mable key to change the 5-Tone encoding digit.
To change the tones, select the desired digit using
the [ A ] / [ B ] keys, then change the number using
the SIDE-1/SIDE-2 keys.
r Press the [ D ] key to store the new setting. The
display indicates "- SET -" briefly, then reverts to
the normal channel indication.
You may cancel the new setting by pressing the [ C ]
key. In this case, the display indicates "- CANCEL -"
briefly.
In the VX-459, you may enter the 5-Tone encoding
code directly from the 16-Button DTMF keypad ( [ 0 ]
- [ 9 ] ) and [  ] key (wild card).
VX-450 S O
erieS perating
a
dVanced
)
nly
M
anual
o
peratIon
s d
peed Ial ( Vx-454 & Vx-459 o
Your Dealer may have pre-programmed Auto-Dial
telephone number memories into your radio.
To dial a number, press the [ A ] / [ B ] key to select the
Auto-Dial memory number list provided by your
Dealer or Network Administrator, then press the PTT
switch. The DTMF tones sent during the dialing se-
quence will be heard in the speaker.
In the VX-459, press (or press and hold) the assigned
Programmable key, then press the front panel's nu-
meric key corresponding to the Auto-Dial memory
number list provided by your Dealer or Network Ad-
ministrator. The DTMF tones sent during the dialing
sequence will be heard in the speaker.
)
nly
31