Vertex Standard VX-451 Operating Manual page 35

s s
tatus et ( Vx-454 & Vx-459 o
Press (or press and hold) the assigned Programmable
key to change the 5-Tone status code. To change the
status code, select the desired digit by [ A ] key, then
change the number by [ B ] / [ C ] key, and store the
number by [ D ] key.
s u /d
tatus p oWn ( Vx-454 & Vx-459 o
Press (or press and hold) the assigned Programmable
key to select a 5-Tone status code from the pre-
defined status list.
s c
tatus HecK ( Vx-454 & Vx-459 o
Press (or press and hold) the assigned Programmable
key to check the 5-Tone receive status code. When
you press (or press and hold) this key, the display will
indicate the "Message" corresponding to the receive
status condition per the pre-defined status list.
VX-450 S O
erieS perating
a o
dVanced
)
nly
)
nly
)
nly
M
anual
peratIon
d
uty
Press (or press and hold) the assigned Programmable
key to toggle the Duty function of the 2-tone/5-tone
decoder "On" and "Off."
When the Duty function is set to "On," the user will
always hear (depending on the sub-audio signalling)
all traffic on the paging channel. The radio will sound
the paging alert when it receives the programmed
2-tone/5-tone code.
When the Duty function is set to"Off," the user
will NOT hear normal radio traffic on the pag-
ing channel. The radio will sound the paging alert
and unmute only when it receives the programmed
2-tone/5-tone code.
33