Vertex Standard VX-451 Operating Manual page 36

Id c
HecK ( Vx-454 & Vx-459 o
This function allows logged ID of the DTMF Signal-
ing and 5-tone Signaling to be reviewed and relayed
(5-tone Signaling only) to a specific station:
r Press (or press and hold) the assigned program-
mable key to display the logged ID of the DTMF
Signaling and 5-tone Signaling.
r Press the [ A ] key to select the category ("DTMF
Signaling" or "5-tone Signaling") to be reviewed,
then press the SIDE-1/SIDE-2 keys to select the
ID.
r Press the [ B ] key to toggle the display between
the "ID code display" and "Tag display".
r Press the [ D ] key to send the Call back, when
recalling the ID of the "5-tone Signaling", if de-
sired.
You may cancel the Call back sending by press-
ing the [ C ] key. In this case, the display indicates
"- CANCEL -" briefly.
34
a
dVanced
)
nly
o
peratIon
arts l
ogIn ( Vx-454 & Vx-459 o
This function enable the displaying the logged ID of
the MDC1200 ARTS
TM
r Press (or press and hold) the assigned program-
mable key to display the number of the logged
station of the MDC1200 ARTS
r Press the SIDE-1/SIDE-2 keys to display the ID.
o s 1
ptIon WItcH
Activates the optional accessory "1" while pressing
the assigned Programmable key.
o s 2
ptIon WItcH
Press (or press and hold) the assigned Programmable
key to toggle the optional accessory "2" "On" and
"Off."
rec
( r
dVs-8
equIres tHe
Press (or press and hold) the assigned Program-
mable key to enable the Voice Recording Mode. If
the incoming signal is received, so as to un-mute
the squelch and pass audio, then the "
ø
flash and received audio will be recorded. When the
voice recording is completed, the "
VX-450 S
)
nly
(ARTS II).
TM
(ARTS II).
TM TM
dVs-9 )
or
" Icon will
ø
" stays on .
ø: VX-454 and VX-459 Only.
O M
erieS perating anual