Silvercrest SAB 160 A1 Operating Instructions Manual page 20

Bass/Treble/Balance/Fader
GB
CY
further settings via the multi controller
16
♦ Press the multi controller on the device. The current volume level is shown.
Each additional press of the multi controller accesses the next setting point.
The following settings are possible:
VOL - Volume (from 0 to 50),
BAS - Bass (from -10 to 10),
TRB - Treble (from -10 to 10)
BAL - Balance (sound distribution between the right and left speakers)
(from 10L to 10R)
FAD - Fader (sound distribution between the rear and front speakers)
(from 10F to 10R)
♦ Turn the multi controller to change the settings of the displayed menu items.
♦ Hold down the multi controller for approx. 2 seconds and then press the
multi controller repeatedly until the desired function appears in the display.
INVOL - switch on volume
♦ Turn the multi controller to set the volume level, with which the device is to
be set when turned on.
REC - Recording format
♦ Turn the multi controller to set the record format for recording on SD/MMC
and/or USB data carriers, MP3 (MP3 data) or WMA (Windows Media
Audio).
SUBW - Subwoofer
You can connect an active external subwoofer to produce a more powerful bass
eff ect.
♦ Turn the multi controller to turn the bass eff ect on (SUBW ON) or off
(SUBW OFF).
ADJ - Time of day
NOTICE
► The device is equipped with an RDS controlled clock. The clock sets itself
automatically when the EON function is switched on and also continues to
run when the radio is switched off . If you do not receive any RDS signal you
can also set the time of day manually.
♦ Turn the multi controller to the right to set the hours and to the left to set the
minutes.
Handling and operation
SAB 160 A1