System Event - Samsung iPolis SNM-128S User Manual

1. To set up a timeline, go the "Time Scheduling" page.
2. Exclusive timelines can be selected (up to 4) in the "Time Scheduling" page.
3. The operator can control the relay action of DVRs at any time, regardless of
the relay settings.

4.3.15 System Event

<System Alert>
Check on event options to activate them when system errors occur.
- HDD Error
- HDD Full
- Fan Error
- Incorrect Password
- DDNS Authorization Failure
<Alert Type>
Turn on or off the Alert option for system errors.
- Beep
- Send E-Mail
- Relay On
: Activates an event if the recording HDD or a selected unit is
suddenly disconnected or causes an error.
: Activates an event if the recording HDD of a selected unit is
full.
: Activates an event if the fan of a selected DVR unit suddenly
stops operating.
: Activates an event if a user or administrator password does
not match with the ID.
: Activates an event if a selected unit has failed to be registered
to the DDNS server.
: Plays a beep when system errors occur.
: Sends an e-mail to report system errors on a regular basis.
: Activates a relay when a system error occurs.
69
User's Manual