Ptz - Samsung iPolis SNM-128S User Manual

User's Manual
4.3.6

PTZ

The label on each tab indicates a camera channel number. Select a channel to connect your
PTZ.
4.3.6.1 PTZ Setup
To use PTZ, you must select PTZ in the COM Port page.
- Activate
- PTZ Port
- Address
- PTZ Home
Time Out Period
If a PTZ device is already connected, you must first set up the device under the
"Channel" and "Device" tabs.
4.3.6.2 Setting Up Presets
Click "Preset" to open the Preset Settings window.
: Check the box to connect the channel to the PTZ.
: Select a serial port for the PTZ device.
: Enter the address of the PTZ device. The PTZ device settings value
is the address.
: Set up a period to command the camera to move to a selected preset
if no movement is detected for the period.
62