Samsung iPolis SNM-128S User Manual page 95

User's Manual
- System ID
- Baud Rate
- Data Bit
- Parity Bit
- Stop Bit
4.3.25.5.1 Serial (RS-485/422)
Configure settings to connect monitoring products such as cameras and CCTVs.
- System ID
- Baud Rate
- Data Bit
- Parity Bit
- Stop Bit
4.3.25.6 System
Set up the general system information of a DVR.
: Enter the ID for a system.
: Select a data transfer speed (bits per second).
: Select a data transfer bit.
: Select a type to check data transfer errors.
: Select a bit transmitted after completing a data transfer.
: Enter the ID of the system.
: Select a data transfer speed (bits per second).
: Select a data transfer bit.
: Select a type to check data transfer errors.
: Select a bit transmitted after completing a data transfer.
94