Table of Contents
Advertisement
PARTS AND SERVICE
This product has been expertly en gi neered and carefully manu fac tured to rigid quality stan dards. As with all
mechanical products, some adjustments or part replacement may be necessary during the life of your unit.
For Parts and service, contact our authorized distributor: call 1-800-849-1297
•
For replacement parts, have available the following information:
a.
Model Number/Manufacturer's I.D. Number
b.
Description of part.
For Technical Assistance: call 1-800-829-5886
For a Parts Manual, go to our website: www.weedeater.com
NOTE:
HOP provides parts and service through its au thor ized dis tribu tors and dealers; there fore,
all requests for parts and service should be directed to your local dealer(s). The phi loso phy
of HOP is to con tinu ally improve all of its prod ucts. If the operating characteristics or the
appearance of your product differs from those described in this Manual, please contact
your local dealer for updated in for ma tion and as sis tance.
03.24.11 BAD/SR
Printed in the U.S.A.
Operator's Manual
26" RIDING MOWER
SIDE DISCHARGE
ELECTRIC START
Catalog No.
WELRV1
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The
use of any gasoline exceeding 10% ethanol (E10) will void the product warranty.
532 44 20-89 Rev. 3
IMPORTANT:
Read and follow all Safety
Rules and Instructions before
op er at ing this equipment.
Patents Pending
Advertisement
Table of Contents
Related Manuals for Weed Eater One WELRV1
Summary of Contents for Weed Eater One WELRV1
-
Page 1: Parts And Service
Operator’s Manual 26" RIDING MOWER SIDE DISCHARGE ELECTRIC START PARTS AND SERVICE This product has been expertly en gi neered and carefully manu fac tured to rigid quality stan dards. As with all mechanical products, some adjustments or part replacement may be necessary during the life of your unit. For Parts and service, contact our authorized distributor: call 1-800-849-1297 •... -
Page 2: Table Of Contents
TABLE OF CONTENTS Warranty ..........2 Maintenance ......... 16 Safety Rules ........... 3 Service and Adjustments ...... 20 Product Specifications ......6 Storage ..........24 Assembly/Pre-Operation ......7 Troubleshooting ........25 Operation ..........10 Repair Parts .......... 27 Maintenance Schedule ......16 WARRANTY LIMITED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in materi-... -
Page 3: Safety Rules
RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) SAFETY RULES DECALS DANGER: This cutting machine is ca pa ble of amputating hands and feet and throwing objects. Failure to observe the fol low ing safety instructions could result in serious injury or death. •... - Page 4 RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) SAFETY RULES MOWER DECK KEY PART NO. NO. DESCRIPTION 532 42 81-93 DECK, 26" II. SLOPE OPERATION III. CHILDREN 532 19 28-70 MANDREL ASM 532 43 25-20 KEEPER, BELT Slopes are a major factor related to loss of Tragic accidents can occur if the operator 532 43 25-94 PULLEY, MANDREL...
- Page 5 RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) SAFETY RULES MOWER DECK • Never fill containers inside a vehicle or • If you strike a foreign object, stop and on a truck or trailer bed with plastic liner. inspect the machine. Repair, if necessary, Always place containers on the ground before restarting.
-
Page 6: Product Specifications
RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) PRODUCT SPECIFICATIONS STEERING CUSTOMER RESPONSIBILITIES Gasoline Capacity 1.2 qt. • Read and observe the safety rules. and Type: Unleaded Regular • Follow a regular schedule in main tain ing, Oil Type SAE 30 (above 32°F) caring for and using your riding mower. -
Page 7: Assembly/Pre-Operation
RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) ASSEMBLY/PRE-OPERATION STEERING Your new riding mower has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your riding mower all parts and hardware you as sem ble must be tightened securely. Use the correct tools as nec es sary to in sure proper tightness. - Page 8 4. Pivot seat and pan forward and as sem ble TO INSTALL MULCHER PLATE RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) adjustment knob and flat washer loosely. DRIVE (If previously removed) Do not tighten. 1. Raise and hold deflector shield in up right po si tion.
- Page 9 ✓ RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) WARNING: Before starting, read, un- DRIVE CHECKLIST der stand and follow all in struc tions in the Operation section of this manual. Be sure Before you operate your new riding mower, riding mower is in a well-ventilated area. we wish to assure that you receive the best Be sure the area in front of riding mower is performance and satisfaction from this...
-
Page 10: Operation
RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) OPERATION CHASSIS These symbols may appear on your riding mower or in literature supplied with the prod- uct. Learn and understand their meaning. KEY PART NO. NO. DESCRIPTION FAST REVERSE NEUTRAL HIGH SLOW 532 42 80-48 WELDMENT, CHASSIS CHOKE... - Page 11 RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) KNOW YOUR RIDING MOWER CHASSIS READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR RIDING MOWER Compare the illustrations with your riding mower to familiarize yourself with the locations of various controls and ad just ments. Save this manual for future reference. Parking Brake Pedal Brake...
- Page 12 RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) The op er a tion of any riding mower can result in foreign objects thrown ELECTRICAL into the eyes, which can result in severe eye dam age. Al ways wear safety glass es or eye shields while op er at ing your riding mower or per form ing any ad just ments or repairs.
- Page 13 RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) TO OPERATE MOWER REVERSE OPERATION SYSTEM (ROS) ELECTRICAL Your riding mower is equipped with an Your tractor is equipped with a Reverse operator presence sensing switch. Operation System (ROS). Any attempt by attempt by the operator to leave the seat the operator to travel in the reverse direc- with the engine running and the deck clutch tion with the deck clutch engaged will shut...
- Page 14 TO OPERATE ON HILLS • For cold weather operation you should RIDING MOWER - -CATALOG NO. WELRV1 (96026000201) change oil for easier starting (See the oil SCHEMATIC WARNING: Do not drive up or down viscosity chart in the Main te nance sec tion hills with slopes great er than 15°...
-
Page 15: Recoil Starting System
TROUBLESHOOTING CHART: RECOIL STARTING SYSTEM • Do not mow grass when it is wet. Wet This unit is equipped with an engine recoil grass will plug mower and leave undesir- starting system. If the battery is too weak able clumps. Allow grass to dry before PROBLEM CAUSE CORRECTION... -
Page 16: Maintenance Schedule
TROUBLESHOOTING CHART: MAINTENANCE PROBLEM CAUSE CORRECTION Out of fuel. Fill fuel tank. Will not start Bad spark plug. Replace spark plug. Dirty air filter. Clean/replace air filter. Water in fuel. Empty fuel tank and carburetor, refill tank with fresh gasoline and replace fuel filter. -
Page 17: Storage
RIDING MOWER CHECK OPERATOR PRESENCE STORAGE SYSTEM Always observe safety rules when per form ing any main te nance. • When the engine is running, any at- Immediately prepare your riding mower for • Empty the fuel tank by starting the engine tempt by the op er a tor to leave the seat stor age at the end of the season or if the and letting it run until the fuel lines and... -
Page 18: Blade Removal
BLADE REMOVAL ENGINE 1. Lift seat for bolt access. ENGINE 1. Raise mower to highest position to allow 2. Disconnect BLACK battery cable then Your engine speed has been factory set. Do LUBRICATION access to blade. RED battery cable. not attempt to increase engine speed or it Only use high quality detergent oil rated with NOTE: Protect your hands with gloves 3. - Page 19 TO ADJUST BRAKE REAR WHEEL 4. Refill engine with oil through oil fill dipstick CLEAN AIR SCREEN Your riding mower is equipped with an 1. Block up Rear axle securely. tube. Pour slowly. Do not overfill. For Air screen must be kept free of dirt and chaff adjustable brake system which is mounted 2.
-
Page 20: Service And Adjustments
TO LEVEL MOWER HOUSING SERVICE AND ADJUSTMENTS "G" Adjust the mower while riding mower is "H" parked on level ground or driveway. Make sure tires are properly inflated (See side WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY of tire for proper PSI). If tires are over or underinflated, you will not properly adjust SER VICE OR AD JUST MENTS: your mower.