® the forefront of loudspeaker design and performance. Revel in-wall loudspeakers draw upon the same research, resources and unique perspective that put all Revel loudspeakers in a class by themselves. Frame Revel in-wall loudspeakers provide unparalleled value and are known...
Page 4
Place the left and right loudspeakers the same distance from the Note: The W990 and W970 can be used in either horizontal or vertical primary listening area (or as close to the same distance as possible). The orientation.
5.1-Channel Surround Speaker Placement • In a 5.1-channel system, the surround left and surround right Revel architectural speakers are the most easily installed in-wall loudspeakers should be located to the sides of the main listening loudspeakers on the market. However, if you are unable to understand area, 5 ft –...
Revel dealer. Detailed mounting instructions are supplied with the rough-in kit. After the drywall is installed, follow the installation instructions in For Existing Construction, below.
Page 7
5. Make sure that all of the mounting frame’s spring-loaded clamps are 8. Starting from the lower right corner and working in a diagonal torque in their fully-extended positions. Loosen any clamp screws as required sequence, use a power screwdriver to tighten each of the clamp screws only until almost snug.
If you wish to change the grille’s color, its satin finish will function as a primer coat. For the best results follow this procedure: The W990 and W970 will deliver the best performance when the speakers are mounted so that their tweeters are at the same level as 1.