Impex MARCY MCB-346 Owner's Manual page 8

STEP 3 (SEE DIAGRAM 3)
A.) Attach the Leg Developer (#38) to the bracket on the Front Stabilizer (#42). Secure it
with a Socket axle (#44) and Socket Screw (#45). Do not over tighten the Screw. Make
sure the Leg Developer is able to swivel.
B.) Insert two Foam Roll Tubes (#39) halfway through the holes on the Leg Developer.
Push four Foam Rolls (#37) onto the Tubes from both sided.
C.) Attach a Spring Clip (#34) onto the weight post on the Leg Developer.
D.) Attach the Arm Curl Handle (#54) to the bracket on the Leg Developer. Secure it with a
L-shaped Lock Pin (#8).
7
DIAGRAM 3