Page 1
NOTE: Please read all instructions carefully before using this product Table of Contents MARCY CLASSIC Safety Notice Hardware Pack Deluxe Mid-Size Bench Assembly Instruction MCB-5700 Parts List Warranty Ordering Parts Model MCB-5700 Retain This Manual for Reference 07-12-06 OWNER'S MANUAL ®...
EXPLODED DIAGRAM.................………. PARTS LIST…………………………………………………………………………. WARRANTY....................… ORDERING PARTS..................BEFORE YOU BEGIN Thank you for selecting the Marcy Classic Deluxe Mid-Size Bench MCB-5700 ® by IMPEX Inc. For your safety and benefit, read this manual carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction.
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1.
WARNING LABEL PLACEMENT The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown.
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left & Right Upright Beams (#1 & #2) by a Cross Brace (#4) in the mid- span.
Page 7
STEP 2 (See Diagram 2) A.) Attach the Main Seat Support (#3) to the Leg Developer Holder (#9). Secure it with two M10 x 2 3/8” Carriage Bolts (#35), one 2 ¾” x 3” Bent Bracket (#15), two Ø ¾” Washers (#42), and two M10 Aircraft Nuts (#45) vertically.
Page 8
STEP 3 (See Diagram 3) A.) Attach the Backrest Incline Support (#10) in between the two side-holes on the Backrest Supports (#12). Attach the Backrest Supports to the pivot on the Main Seat Support (#3). Secure it with one M12 x 6 ¾” Hex Bolt (#40), two 1”...
Page 9
STEP 4 (See Diagram 4) A.) Attach the Leg Developer (#8) to the Leg Developer Holder (#9). Secure it with an Axle (#23), two M10 x 5/8” Allen Bolts (#37), and two Ø ¾” Washers (#42). B.) Insert one Foam Tube (#16) halfway through the hole on the Leg Developer Holder. Insert two Foam Tubes halfway through the holes on the Leg Developer.
PARTS LIST KEY NO. DESCRIPTION Q’ty Left Upright Beam Right Upright Beam Main Seat Support Cross Brace Backrest Adjustment Bar Crutch Arm Curl Stand Leg Developer Leg Developer Holder Backrest Incline Support Weight Post Backrest Support 5 ½” x 1 ¾” Bent Bracket 5 ½”...
® IMPEX INC. LIMITED WARRANTY ® IMPEX Inc. ("IMPEX ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser.