Table of Contents
Advertisement
ASSEMBLY INSTRUCTION
Tools required assembling the machine: Two Adjustable Wrenches and Allen
Wrenches
STEP 1
(SEE Diagram 1)
A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#15) in the Mid-span.
Secure them with two M10 x 2 3/8" Hex Bolts (#2), four
Bracket (#7), and two M10 Aircraft Nuts (#4) on each end of the Cross Brace.
B.) Insert the Backrest Adjustment Bar (#10) through a selected hole to obtain desired
incline of Backrest.
C.) Insert Right & Left Bar Catches (#13) & (#14) into the selected hole on the Rear Upright
Beams to obtain the desired height to hold the weight bar.
¾" Washers (#3), one
5
DIAGRAM 1
Advertisement
Table of Contents
