Connecting Power Source - LG LW6424 series Owner's Manual

Connecting Power Source

Connect power, using one of the methods listed below:
To use the power adapter
Connect a DC 12 V power source to the power input terminal as shown below.
(recommended power adapter is DC 12 V/1.5 A or above)
(Connect to the DC 12 V UL Listed, Class 2 Power Supply only on the unit. )
To use the PoE (Power over Ethernet) device
Connect the PoE cable to the LAN port on the unit. You must use the "IEEE802.3af" standard PoE device.
PoE Device
(IEEE802.3af )
Note:
If the camera doesn't work properly after connecting PoE device, please check if the PoE device supplies enough power.
12
POWER IN
DC 12 V
ETHERNET
With POE
Connections