Customizing Source Command Labels - AMX DAS-KP-LCD-G Operation/Reference Manual

Customizing LCD Keypad Labels
Source Names are limited to 6 characters.

Customizing Source Command Labels

1. Enter the Setup menu from the front of the Matrix Controller, by pressing the SELECT button.
2. From the menu displayed, select SETUP / MRC / PROGRAM.
3. Select the source # of which you wish to customize the source command name.
4. Select "Learn IR". The first IR command for the source will be displayed.
5. Select "Next" until the IR command you wish to customize is displayed.
6. Select "Label". The first letter of the IR Command Name will be highlighted. Use the UP/DOWN
buttons to change the letters in the IR command name.
Source Command Names are limited to 6 characters.
8
To delete a letter, use the << BACK button.
Press the CENTER button to save the label.
To move from letter to letter, use the FORWARD button.
To delete a letter, use the BACK button.
Press the CENTER button to save the label.
Matrix Audio Controller LCD Keypads