Table of Contents
Advertisement
C Display
The display shows the progamme number or drying time when
programme 9 is selected
D Plus button
The plus button increases the programme number or programme time
E Start button
The start button starts the programme
F Activate button
The activate button should be pressed to power on the dryer. If no
further buttons are pressed within 60 seconds, the dryer will go into
sleep mode. To reactivate, press the activate button again.
G Control panel door
The water bottle is housed behind the control panel door, which can
be pressed to open and close.
H Bottle full warning light
This light is illuminated when the water bottle is full and requires
emptying.
I Anti-crease button
The tumble dryer is equipped with an anti-crease function to prevent
the load creasing by regularly turning the drum when the programme
has finished. When the anti-crease function is selected, the anti-
crease light illuminates, and will flash when the anti-crease function is
active.
J Reset button
The reset button resets the dryer programmes to the default setting.
To return to programme selection after programme 9 has been used,
press the reset button.
K Delay start display
L Delay start button
7
Advertisement
Table of Contents
