Table of Contents
Advertisement
•
F irmly pull the condenser using
the handle to remove it from the
dryer.
•
R inse between the plates under
a tap or with running water to
remove any lint or fluff.
•
C arefully shake any excess water
from the condenser.
•
W hilst the condenser is removed,
clean as much fluff as possible
from inside the ducting by
reaching a hand into the machine.
In particular, keep the passage
from the fan clear (on the right
hand side of the condenser duct).
•
C arefully push the condenser
back into its housing, until it is
pushed fully home and a "click" is heard.
Please note:
All lint and fluff must be removed from around the seals before
replacing the condenser into its housing or water may leak.
The dryer may leak if the condenser is not correctly re-installed.
The condenser will discolour through use. This is normal and does
not constitute a fault.
fig. 2
13
Advertisement
Table of Contents
