Table of Contents
Advertisement
Emptying the water bottle
When the dryer is configured to drain to the internal water bottle, it
must be emptied periodically. The warning light on the control panel
will illuminate when the bottle is full.
•
T o empty the water bottle
•
O pen the control panel door, remove the water bottle and empty it
into a suitable drain.
•
R eplace the water bottle into its housing, ensuring that it is pushed
all the way in, otherwise the dryer will turn but the heat will not
operate.
Please note: If the dryer is configured to drain to the household waste
pipe there is no need to empty the water bottle periodically. The
water bottle must be correctly fitted into its housing to allow the dryer
to operate correctly.
Cleaning the condenser
The condenser and ducting should be cleaned monthly or more
frequently if the dryer is in constant use.
CAUTION: For maximum efficiency, the plates are made from very
thin aluminium and are easily damaged. Do not try to poke anything
between the plates or use a hard object or tool for cleaning. Handle
the condenser carefully at all times to avoid crushing the plates.
12
Advertisement
Table of Contents
