CDA CI560 Manual For Installation, Use And Maintenance page 11

Freestanding
Table of Contents

Advertisement

S elect anti-crease function if required. If you have selected the anti-
crease function, the drum will continue to turn periodically for up to
8 hours or until the dryer is stopped by opening the dryer door or by
disconnecting the dryer from the mains.
I f the door is opened during a cycle the dryer will stop. To restart,
close the door and press the Activate button then press the
coloured Start button.
T here is an automatic 12 minute cool down period at the end of
each cycle, during which the heater is switched off and the green
cool indicator is on. This helps to minimise creasing, and must
always be used fully to avoid the risk of fire.
Should the clothes dry before the cycle has finished the thermostat
will automatically switch off the heater to prevent over drying and
save energy although the drum will still rotate.
When drying large items such as sheets, we suggest you stop the
dryer to redistribute the load.
To stop the machine during the middle of a programme, open the
door: the drum will stop rotating automatically and reset when you
close the door.
To restart the programme, press activate and then the start button.
The final part of the drying cycle occurs without heat (cool down cycle)
to ensure that the items will not be damaged.
Care labels you may find on your fabrics
'Suitable for tumble drying'
'Do not tumble dry'
'Dry flat'
11

Advertisement

Table of Contents
loading

Table of Contents