Making Video Available From The Internet - LevelOne FCS-0010 User Manual

Making Video available from the Internet

If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and
Broadband modem, you can make the FCS-0010/WCS-0010 Network Camera
available via the Internet. You will need to configure your Router or Gateway to allow
connections from the Internet to the camera.
Router/Gateway Setup
Your Router or Gateway must be configured to pass incoming TCP (HTTP)
connections (from Internet Viewers) to the FCS-0010/WCS-0010 Network Camera.
The Router/Gateway uses the Port Number to determine which incoming connections
are intended for the FCS-0010/WCS-0010 Network Camera.
This feature is normally called Port Forwarding or Virtual Servers, and is illustrated
below. The Port Forwarding/Virtual Server entry tells the Router/Gateway that
incoming TCP connections on port 1024 should be passed to the FCS-0010/WCS-
0010 Network Camera. If necessary, check the user manual for your Router/Gateway
for further details.
The "Port" for the Port Forwarding / Virtual Server entry
above is the " Secondary Port" number specified on the
Network screen of the Network Camera.
21