Chapter 4
Advanced Viewing Setup
This Chapter provides information about the optional settings and
features for viewing video via theFCS-0010/WCS-0010 Network
Camera. This Chapter is for the Camera Administrator only.
Introduction
This chapter describes some additional settings and options for viewing live Video:
•
Adjusting the video image
•
Controlling user access to the live video stream
•
Making video available from the Internet
•
Using the Motion Detection feature
Adjusting the Video Image
If necessary, the Network Camera Administrator can adjust the Video image.
To Adjust the Video Image:
1. Connect to the Web-based interface of the FCS-0010/WCS-0010 Network Camera.
(See Chapter 5 - Web-based Management for details.)
2. Select Administration, then Video Image. You will see a screen like the example
below.
4
17