3. Connect the power adapter (5V DC / 2A) to the wall socket, and then connect it to the
'Power' socket of the router.
4. Please check all LEDs on the front panel. Power LED 'P' should be steadily ON, WAN
and LAN LEDs should be ON. Check if the computer / network device connected to the
respective port of the router is powered ON and correctly connected. If power LED 'P'
is not ON, or any LED you expected is not ON, please recheck the cabling, or jump to
'4-2 Troubleshooting'
for possible reasons and solution.
15
DG-BR4313NG User Manual