Digisol DG-BR4313NG User Manual page 110

Add
Reset
Current MAC
Table
Delete
Delete All
Reset
Enable IP Filtering
IP Filtering Table
Add PC
Delete
Delete All
address, like 'ROOM 2A Computer' or anything. You can
input up to 16 alphanumerical characters here. This is
optional and you can leave it blank, however, it's
recommended to use this field to write a comment for
every MAC address as a memory aid.
Click 'Add' button to add the MAC address and associated
comment to the MAC address filtering table.
Remove all inputted values.
Filtering All existing MAC addresses in filtering table will be listed
here.
If you want to delete a specific MAC address entry, check
the 'select' box of the MAC address you want to delete,
then click 'Delete' button. (You can select more than one
MAC address).
If you want to delete all MAC addresses listed here, please
click 'Delete All' button.
You can also click 'Reset' button to unselect all MAC
addresses.
Check this box to enable IP address based filtering, and
please select 'Deny' or 'Allow' to decide the behavior of IP
filtering table. If you select 'Deny', all IP addresses listed
in filtering table will be denied from connecting to the
network; if you select 'Allow', only IP addresses listed in
filtering table will be able to connect to the network, and
rejecting all other network devices.
All existing IP addresses in filtering table will be listed
here.
Click this button to add a new IP address to IP filtering
table, up to 20 IP addresses can be added. Please refer to
section 3-3-1-1 Add PC
If you want to delete a specific IP address entry, check the
'select' box of the IP address you want to delete, then click
'Delete' button. (You can select more than one IP address).
If you want to delete all IP addresses listed here, please
click 'Delete All' button.
DG-BR4313NG User Manual
below.
110