Advertisement
ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram 1)
A.) Connect the two Rear Upright Beams (#1) by a Cross Brace (#2) in the Mid-span.
Secure them with two M8 x 2 ½" Carriage Bolts (#20), one Bracket (#10), two
Washers (#26), and two M8 Aircraft Nuts (#24) on each end of the Cross Brace.
B.) Insert the Backrest Adjustment Bar (#11) through a selected hole to obtain desired
incline of Backrest.
4
5/8"
DIAGRAM 1
Advertisement
